90 degree gear

K97 helical bevel gear box

0.0/5 rating (0 votes)


90 degree gear Product Description

A. Preferential design of the helical bevel gear box is applied in main parameter such as center distance and nominal drive ratio, which guarantee good interconnection between key parts and components.

B. All gears of the 90 degree gear are made of quality alloy steel and treated with carburizing and quenching with tooth surface hardness up to 54-62HRC.

C. helical bevel gear box with Small size, light weight. High precision, large carry capacity, high efficiency, long service life, high reliability, stable driving, and low noise.

D. Normally oil sump lubrication is used for 90 degree gear, with cooling naturally. If thermal power can not be achieved, circular oil lubrication or fan may be used, and cooled with cooling coil pipe.

helical bevel gear box90 degree gear

K series 90 degree gear is one kind of Helical Bevel type gearbox , High-stainless cast iron case,helical bevel gear box is designed based on modularization , which bring many difference kinds of combinations ,mounting types ,and structure designs .The detail classification of ratio can meet various of working condition .High Transmission efficiency ,Low energy consumption, superior performance . The hard tooth surface gear use the high quality alloy steel , the process of carburizing and quenching, grinding ,which give it follow characters : Stable transmission , low noise and temperature ,high loading ,long working life. which widely use for industry equipment of metallurgy ,Building Material , Chemical , Mining , Oil, Transportation , Papermaking , Sugar making , engineering Machines ,etc

1)90 degree gear Output speed: 0.6~1,028r/min

2)helical bevel gear box Output torque: up to 21700N.m

3)90 degree gear Motor power: 0.12~200kW

4)helical bevel gear box Mounted form: foot-mounted and flange-mounted mounting

helical bevel gear box90 degree gear

90 degree gear Mounted way:

KA: hollow shaft output 

KF: flange-mounted solid shaft output 

KAF: flange-mounted hollow shaft output 

KAZ: short-flange-mounted hollow shaft output 

KAT: torque-arm-mounted hollow shaft output 

KAB: foot-mounted hollow shaft output

helical bevel gear box90 degree gearhelical bevel gear box90 degree gear

helical bevel gear box Working Environment

1,90 degree gear Working temperature: -40~50°c ( The lubrication should be heated above 0°c if the machine works below 0°c)

2,The altitude of working place for the helical bevel gear box should be lower than 1000 meters.

3,The input rotate speed of the 90 degree gear should not exceed 1800rpm. The circumferential speed of the gear should not exceed 20m/s.

4,helical bevel gear box is suitable for normal-reverse rotation.

5,90 degree gear is without industry limitation.

6,Please consult our technical supporting department for other circumstances.

helical bevel gear box90 degree gear

Share this product